PRODUCTS
Can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Machine all kinds of flat stocks and those in irregular shapes; Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; There are hand brake and foot brake for users to choose; These series lathes operate on power supply of different voltages (220V,380V,420V) and different frequencies (50Hz,60Hz).
Can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Machine all kinds of flat stocks and those in irregular shapes; Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; There are hand brake and foot brake for users to choose; These series lathes operate on power supply of different voltages (220V,380V,420V) and different frequencies (50Hz,60Hz).
Can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Machine all kinds of flat stocks and those in irregular shapes; Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; There are hand brake and foot brake for users to choose; These series lathes operate on power supply of different voltages (220V,380V,420V) and different frequencies (50Hz,60Hz).
Can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Machine all kinds of flat stocks and those in irregular shapes; Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; There are hand brake and foot brake for users to choose; These series lathes operate on power supply of different voltages (220V,380V,420V) and different frequencies (50Hz,60Hz).
Can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Machine all kinds of flat stocks and those in irregular shapes; Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; There are hand brake and foot brake for users to choose; These series lathes operate on power supply of different voltages (220V,380V,420V) and different frequencies (50Hz,60Hz).
Can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Machine all kinds of flat stocks and those in irregular shapes; Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; There are hand brake and foot brake for users to choose; These series lathes operate on power supply of different voltages (220V,380V,420V) and different frequencies (50Hz,60Hz). Can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Machine all kinds of flat stocks and those in irregular shapes; Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; There are hand brake and foot brake for users to choose; These series lathes operate on power supply of different voltages (220V,380V,420V) and different frequencies (50Hz,60Hz).
Precision ground and hardened bed ways The spindle is supported with precision roller bearings Head stock gears are made of high quality steel ground and hardened Easy operating speed change levers Removable gap is provided for larger diameter work Easy operating gear box has various feed sand thread cutting function
Guide ways ultrasonic frequency quenched to ensure a long service life Guide ways ground to ensure high accuracy Spindle bore 52mm and the spindle nose conforms to ISO-C6 Gears in head stock precisely ground to reduce noise Feeding box well sealed to eliminate leakage
Guide ways ultrasonic frequency quenched to ensure a long service life Guide ways ground to ensure high accuracy Spindle bore 52mm and can be enlarged to 82mm as optional Gears in head stock precisely ground to reduce noise Feeding box well sealed to eliminate leakage Kinds of threads Tail stock locked by thread or cam lock. Electric system is reliable and safe. Electromagnetic brake at users option.
The guide way and all gears in the headstock are hardened and precision ground. The spindle system is high rigidity and accuracy. The machines have powerful headstock gear train, high rotating accuracy and smooth running with Iow noise. An overload safety device is provided on the apron. Pedal or electromagnetic braking device. Tolerance test certificate, test flow chart included
Spindle speed variable with 4 steps. Big Bore Lathe Machine removable bridge for machining of large parts high accuracy and low-noise operation even at high cutting power heavy and large bed hardened guideways (>HB 400) large spindle capacity 105 mm for machining of long parts manual central lubrication multi-disk clutch for soft start up with heavy parts automatic lubrication of head stock and main drive protected leadscrew overload protection for feed shaft and leadscrew support moves in linear and cross direction via rapid feed
Big Bore Lathe Machine removable bridge for machining of large parts high accuracy and low-noise operation even at high cutting power heavy and large bed hardened guideways (>HB 400) large spindle capacity 105 mm for machining of long parts manual central lubrication multi-disk clutch for soft start up with heavy parts automatic lubrication of head stock and main drive protected leadscrew overload protection for feed shaft and leadscrew support moves in linear and cross direction via rapid feed
Large spindle bore of 65mm Main spindle dynamic balanced, and supported at 2 points with taper roller bearings Outward appearance feat using large plains, making the machine more good-looking Gapped bed ways, which are super-audio frequency hardened All gears hardened and ground Leadscrew and feed rod interlocked, both with overload protection Automatic feed stopper Configuration variable totally according to orders: Metric or inch system; Right or left hand wheel; Large plane type; Halogen lamp; Quick change tool past; DRO; T-slot compound; Chuck guard; Leadscrew hood; Rapid traverse motor; Electromagnetic brake; Forced lubrication system.
Large spindle bore of 65mm Main spindle dynamic balanced, and supported at 2 points with taper roller bearings Outward appearance feat using large plains, making the machine more good-looking Gapped bed ways, which are super-audio frequency hardened All gears hardened and ground Leadscrew and feed rod interlocked, both with overload protection Automatic feed stopper
Large spindle bore of 65mm Main spindle dynamic balanced, and supported at 2 points with taper roller bearings Outward appearance feat using large plains, making the machine more good-looking Gapped bed ways, which are super-audio frequency hardened All gears hardened and ground Leadscrew and feed rod interlocked, both with overload protection Automatic feed stopper
Frequency heated bed ways. Hardened and grounded gears in the head stock. With 2 precision D degree taper roller bearings on the spindle. Integrated deluxe cast iron floor stand. Tolerance test certificate, test flow chart included.
Big Bore Lathe Machine removable bridge for machining of large parts high accuracy and low-noise operation even at high cutting power heavy and large bed hardened guideways (>HB 400) large spindle capacity 105 mm for machining of long parts manual central lubrication multi-disk clutch for soft start up with heavy parts automatic lubrication of head stock and main drive protected leadscrew overload protection for feed shaft and leadscrew support moves in linear and cross direction via rapid feed
Spindle variable speed,with 4 steps Big Bore Lathe Machine removable bridge for machining of large parts high accuracy and low-noise operation even at high cutting power heavy and large bed hardened guideways (>HB 400) large spindle capacity 105 mm for machining of long parts manual central lubrication multi-disk clutch for soft start up with heavy parts automatic lubrication of head stock and main drive protected leadscrew overload protection for feed shaft and leadscrew support moves in linear and cross direction via rapid feed
The guide way and all gears in the headstock are hardened and precision ground. The spindle system is high rigidity and accuracy. The machines have powerful headstock gear train, high rotating accuracy and smooth running with Iow noise. An overload safety device is provided on the apron. Pedal or electromagnetic braking device. Tolerance test certificate, test flow chart included Spindle bore 80mm is optional
Features: Precision ground and hardened bed ways The spindle is supported with precision roller bearings Head stock gears are made of high quality steel ground and hardened Easy operating speed change levers Removable gap is provided for larger diameter work Easy operating gear box has various feed sand thread cutting function
Spindle speed variable changed, with High Low speed steps,with speed display The guide way and all gears in the headstock are hardened and precision ground. The spindle system is high rigidity and accuracy. The machines have powerful headstock gear train, high rotating accuracy and smooth running with low noise. An overload safety device is provided on the apron. Pedal or electromagnetic braking device. Tolerance test certificate, test flow chart included
The guide way and all gears in the headstock are hardened and precision ground. The spindle system is high rigidity and accuracy. The machines have powerful headstock gear train, high rotating accuracy and smooth running with Iow noise. An overload safety device is provided on the apron. Pedal or electromagnetic braking device. Tolerance test certificate, test flow chart included Spindle bore 105mm is optional
The guide way and all gears in the headstock are hardened and precision ground. The spindle system is high rigidity and accuracy. The machines have powerful headstock gear train, high rotating accuracy and smooth running with Iow noise. An overload safety device is provided on the apron. Pedal or electromagnetic braking device. Tolerance test certificate, test flow chart included