1.X axis is automatic feed through gear box
2.Spindle box is gear drive, quill can feed manually.
3.Ram is movable forward and backward, and swivel 180 degrees.
4.Three axis hardened treatment.
Quantity: | |
---|---|
Product Parameter
Specifications | Unit | ZX6350C |
Table size | mm | 1200X280 mm |
T slot no. /width/distance | mm | 3/16/50 mm |
Max. load of Table | kg | 250 kg |
Table XYZ axis Travel | mm | 700x340x500 mm |
Spindle taper | ISO40 | |
spindle speed /step -- Vertical | 115-1750/8steps | |
--Horizontal | 40-1300/12steps | |
Max.drilling dia. | mm | 30 |
Max.end milling width | mm | 100 |
Max. vertical milling Dia. | mm | 25 |
Max.Tapping Dia. | mm | M16 |
Quill travel | mm | 120 |
swivel angle of headstock | ±45º | |
vertical spindle axis to column surface | mm | 230-680 |
vertical spindle nose to table surface | mm | 30-530 |
horizontal spindle axis to table surface | mm | 0-500 |
horizontal spindle axis to arm bottom | mm | 200 |
ram travel | mm | 500 |
Longitudinal/cross feed | mm/min | 24-720/8steps |
Longitudinal/cross rapid speed | mm/min | 720(X) |
Main motor | kw | 0.85/1.5(V), 2.2(H) |
Feed motor | kw | 0.37(X) |
coolant motor | kw | 0.04 |
overall dimension (CM) | cm | 152X1285X215 |
N/W,G/W | kg | 1350/1500 |
Standard Accessories
Drill chuck
Collet chuck kits
Draw bar
Reduction sleeve
Mill arbors
Working lamp
Coolant system
Chip tray
Machine vice
Operate tools
Optional Accessories
3-axis DRO
Y-Axis auto power feed
58 pcs clamping kits