 |
1.Quiet B section belt drive system
2.Milling head rotates 360 on column
3.Extra large 820 x 240mm ground work table with T-slots
4.Adjustable leadscrew nuts eliminating backlash on both axis
5.Fine feed hand wheel operating quill feed
6.Forward and reverse on/off switch
7.3MT spindle with 75mm diameter quill
8.Adjustable table and drill length stops
9.Rack and pinion wind-up head
10.Rear slide-way cover and slide clamps on all axis
11.Spindle lock for quill
12.Table lock on both axis
13.Metric dial graduations @ 0.05mm for X & Y axis
14.Optional power feed fits straight on the table
| Quantity: | |
|---|---|
Product Description
Model | ZAY7020 | ZAY7032 | ZAY7040 | ZAY7045 |
Drilling capacity | 20mm | 32mm | 40mm | 45mm |
Face milling capacity | 63mm | 63mm | 80mm | 80mm |
End milling capacity | 20mm | 20mm | 32mm | 32mm |
Distance from spindle nose to table | 435mm | 450mm | 450mm | 450mm |
Min.distance from spindle axis to column | 181.5mm | 203.5mm | 203.5mm | 203.5mm |
Spindle travel | 85mm | 130mm | 130mm | 130mm |
Spindle taper | M.T.3 or R8 | M.T.3 or R8 | M.T.4 or R8 | M.T.4 or R8 |
Step of spindle speed | 12 | 12 | 12 | 12 |
Range of spindle speed 50Hz | 100-2200 r.p.m | 80-2080 r.p.m | 80-2080 r.p.m | 80-2080 r.p.m |
60Hz | 120-2640 r.p.m | 100-2500 r.p.m | 100-2500 r.p.m | 100-2500 r.p.m |
Swivel angleof headstock (horizontally) | 360 | 360 | 360 | 360 |
Table size | 520/160mm | 800/240mm | 800/240mm | 800/240mm |
Forward and backward travel of table | 140mm | 175mm | 175mm | 175mm |
Left and right travel of table | 290mm | 500mm | 500mm | 500mm |
Motor Power | 0.55KW | 0.75KW | 1.1KW | 1.5KW |
Voltage/frequency | As customer's requirement | |||
Net weight/gross weight | 130kg/190kg | 280kg/330kg | 283kg/333kg | 285kg/335kg |
Packing size | 620/750/1000mm | 1020/820/1160mm | 1020/820/1160mm | 1020/820/1160mm |
Loading amount | 48pcs/20'container | 28pcs/20'container | 28pcs/20'container | 28pcs/20'container |
Standard Accessories
1.Allen srench
2.Wedge
3.Tie rod
Optional Accessories
1.Drill chuck
2.Milling cutter holder
3.Mill chuck
4.Power feed attachment
5.Auto-tapping electrical
6.Paraller vise
7.Working lamp
8.Coolat system
9.Machine stand and chip tray