The machine is suitable for machining the straight gear, spiral gear, cylindrical gear and worm wheel etc.
The herringbone gear without recess can be machined by end milling cutter and in cooperation with
reversing mechanism.
1. The end milling cutter used for single gear indexing and disc milling cutter used for automatically cycle machining and also for single gear indexing by single button.
2. The accuracy is not less than 7 grade by gear hobbing process and 8 grade by single gear indexing.
3. The table centering is by means of hydrostatic bearing and press oil supplied through gear oil divider.
The single worm transmitting used for Y31500 machine and there are two mate setting washes.
Quantity: | |
---|---|
Product Description
Item | Y31315B | YQ31400 | Unit | |
Max work piece diameter | With rear | 2000 | 2000 | mm |
Without rear | 3150 | 4000 | mm | |
Max modulus | Steel | 30 | 30 | mm |
Cast iron | 40 | 40 | mm | |
Max machining width | 1800 | 1800 | mm | |
Max diameter/length of hob | 400/500 | 400/500 | mm | |
Worktable diameter | 2550 | 2550 | mm | |
Hob main axis turning number | 5.5-40 | 5.5-40 | r/min | |
Arbor diameter | 40/50/60/70/80 | 40/50/60/70/8065 | mm | |
Worktable max carrying capacity | 40 | 40 | T | |
Knife rest vertical travel | 2000 | 2000 | mm | |
Main motor | 37 | 37 | k w | |
Spindle taper | Metric 100 | Metric 100 | ||
Worktable aperture | 200-2100 | 200-2450 | mm | |
Size (length × width× height) | 11450×5070×5200 | 11850×5070×5200 | mm | |
Weight | 100 | 106 | T |