T807A Cylinder Boring Machine is mainly used for maintaining the cylinder of motorcycle. etc.
Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is determined, and the cylinder is fixed, maintenance of honing can be carried out .The cylinder of the motorcycles with diameters φ39~72 mm and depths within 160 mm can all be bored, If the suitable fixtures are fitted, other cylinder bodies with corresponding requirements can also be bored.
Diameter of boring hole
Max. Boring depth
Rotational speed of spindle
Steps of variable speed of spindle
Feed of spindle
Return and rise mode of boring spindle
220v or 380v
Centering range of centering device
Overall dimensions(L*W*H) mm
Weight of main machine(approx)
N.W 80kg G.W 125kg
centering push rod,
press ring of cylinder,
spring (for centering push rod)