M807A Cylinder honing Machine is mainly used for maintaining the cylinder of motorcycle. etc.
Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is determined, and the cylinder is fixed, maintenance of honing can be carried out .The cylinder of the motorcycles with diameters φ39~80 mm and depths within 180 mm can all be honed, If the suitable fixtures are fitted, other cylinder bodies with corresponding requirements can also be honed.
DIAMETER OF HONING HOLE
MAX. HONING DEPTH
STEPS OF VARIABLE SPEED OF BORING/HONING SPINDLE
ROTATIONAL SPEED OF HONING SPINDLE
HONING SPINDLE FEEDING SPEED
centering push rod,
press ring of cylinder,
spring (for centering push rod)