X axis and Z axis are driven by the servo motor to drive the precision ball leadscrew to achieve fast shifting and rapid feeding. Ball screw is C3 degree with high precision.
The machine with 4 position tool post, high positioning accuracy, high strength, good shock resistance.
Machine adopts Centralized lubrication.
The bed adopts Resin sand molding, high-quality cast iron casting, guide way fired depth is up to 3mm, improving wear resistance and stability
Spindle structure using front and rear ends of the typical structure of two points of support, with high rigidity.
Main drive for the second gear stepless frequency control, speed range of 21 ~ 1600r / min
Max .Swing over bed
Max.swing over carriage
Max.length of work piece
width of bed
section of turning tool
Thru-hole of spindle
Spindle speeds (stepless)
independent spindle 100-1600rpm
Tailstock center sleeve travel
Tailstock center sleeve taper
X/Z rapid traverse
Packing dimensions (L*W*H )
Weight(kg) for 750
Weight(kg) for 1000
1. GSK 980TDC CNC controller
2. 3- jaw manual chuck diameter 200mm with flange
4. Electric Lubrication
5. 4 Positions tool post
6. Work light
7. double ended wrench, hexagonal wrench, square box wrench,hook spanners.
9. manual tailstock
10.hand push oil gun
11. foundation bolts
12.English operation manual of machine, automatic lubrication device instruction,
CNC SYSTEM instruction,quality passed testing booklet.
1. FANUC or SIEMENS CNC controller
2. Spring fastener
3. 6 positions tool post
4. hydraulic tailstock
5. hydraulic chuck