1.The working table of the machine tool is provided with three different directions of feed (longitudinal, horizontal and rotary), therefore work object go through once clamping, Several surfaces in the machine tool machining
2.Hydraulic transmission mechanism with sliding pillow reciprocating motion and hydraulic feed device for working table.
3.The sliding pillow has the same speed in every stroke, and the movement speed of the ram and the working table can be adjusted continuously.
4.Hydraulic control table have ram commutation oil for oil reversing mechanism, In addition to hydraulic and manual feed outer, Even there single motor drive vertical, horizontal and rotary fast moving.
5.Use hydraulic feed the slotting machine, Is when the work is over turning back instantaneous feed, Therefore be better than mechanical slotting machine used drum wheel feed.
Main Technology Data
Max length of the ram slotting
Ram movement times
18.104.22.168 time min
22.214.171.124 time min
Vertical adjustment of ram distance
Head bearing surface to the bed from the front walls
Between the work surface to the lower carriage distance
Table max.longitudinal movement distance
Table max. lateral movement distance
Max. swivel table
Table aspect motorized feed range
Table rotation feed range
Motor speed (calulated value)